Bell Arm Mounting Errata

Tom · Post by **Tom** » Sun Jun 23, 2024 9:14 pm

Page 12 indicates the Bell arm to be attached via M2 Locknut, however the daughter board as received has a threaded insert in the board now. No issues... just one for the errata sheet. (screen caps for clarity)

: Screenshot 2024-06-23 at 2.06.14 PM.png (175.43 KiB) Viewed 13921 times

(holding the daughter board... with bell arm mounted to threaded insert.

: Screenshot 2024-06-23 at 2.10.58 PM.jpg (159.8 KiB) Viewed 13921 times